Golf Accessories Information And More

Our Featured Golf Writer


You will find a lot of easy tips and techniques in this eBook to quickly transform your golf game and add 20 yards to your drive!

Cast Iron Golf Clubs Or Forged?

By: Lee MacRae

With a larger variety of golf clubs coming onto the scene every week, it can become more and more difficult to determine just exactly what you should be looking for when buying new clubs.

Follow along as we discuss each type and what may be best for you.

To begin with, it can be stated that "off the shelf" golf clubs will work for nearly everybody standing between 5 feet and six feet tall. And it doesn't matter if you are male or female, the general rule applies. Taller or shorter? Then I suggest you take a look at custom made clubs. It will help your game considerably.

Cast or Forged Golf Club?

Standard cast iron golf clubs are the normal way to go.

Why, you ask? Well, cast iron golf clubs normally have a bigger "sweet spot". That refers to the area right in the middle of the club face. A larger sweet spot gives you a larger striking area and greater odds for a well-hit shot. You can still be a little "off center" and the ball is still struck well because you have a larger margin of error. You can see why beginners are usually told to stay with cast iron clubs Until their swing plane is more developed, they will have an easier time striking the ball on a consistant basis with the cast iron club. This is the major reason why you see larger or even "oversized" clubs made, especially the oversized drivers today. These clubs allow for a larger sweet spot and make the game a lot easier for the average player

By contrast, forged iron golf clubs are "harder to hit" a good shot with as they have a smaller sweet spot.

So why would people buy a forged iron golf club?

Well, because they are made of a softer steel, they offer a better "feel" on each and every shot. The better players, on the other hand, will give up that larger sweet spot [and even some distance] to get that better feel of each and every shot they take. With a more consistant swing, they usually strike the ball dead center on most shots anyway. With the better feel of the forged iron club, they can draw, fade, hook or slice the ball deliberately when circumstances on the golf course require it.

The next thing to look at is the shaft itself. Will we get one made from steel? Or will it be a composite material?

The important thing to look at here is your club head velocity. Any typical Sunday golfer will generate a club speed of 80 to 94 mph. With speeds registering lower than that, you ought to think of using a composite style of shaft on your clubs . With a slower swing speed comes less distance on your drives. Less distance means more shots needed to reach the putting green. Not a good thing if you want to lower your score. Composite shafts will allow you to get that much needed distance on your shots. And even within the composite shaft class, you will find variations in flex and materials that will affect your game.

For those of you with faster swing speeds, and subsequenlty good distances, steel shafted clubs will give you a lot more control on your shots. This is very similar to the advantages of iron over cast clubs.

In order to determine your personal swing speed, look for a sports shop or golf store that has speed sensor equipment and get yourself clocked.

So there you have it. Just a few quick tips but ones that will start you down the path to finding the right clubs for your game. Take the time to try different clubs and see how they hinder or help your game. If possible, even try different types of composite shafts. Different manufacturers will have different standards for shaft flex and so on. Check out as many as possible and take note of how each works for you.

If you implement these tips and work on them, you will be certain to develop a better drive within a short period of time. Just keep on practicing and working on your improvement. It's only a matter of time before your scores begin to drop.

Improve your golf game with a great golf training aid today!

Additional Info On Golf Today

Turning hands counterclockwise on the shaft (weak grip), promotes a left-to-right flight of the ball (slice). Turning hands clockwise (strong grip) promotes a right-to-left flight of the ball (hook).
...Golf Instruction Guide

Proper Sequence Is Key
There are many elements of impact that must come together to produce consistency, but the key lies in the sequence. From the top of the backswing, the legs and hips must initiate the downswing by moving toward the target, past their original position at address. This creates the proper tilt in the shoulders that allows the right arm to remain flexed at impact, while the left wrist becomes flat. Basically, a proper impact position is the result of a proper sequence of movements.
...Golf Tips magazine

Putting Tip
Wanna be a good putter? Here are some basic fundamentals you should be practicing.
--Get a putter with a very distinct line marked on it to indicate the target line and practice with a chalk line. You can get a chalk line at any hardware store for 5 or 6 bucks, and it's as valuable a training aid as there is anywhere. Find a putt on the practice green that is straight. Snap a chalk line down from about 5 or 6 feet to the middle of the cup. Make sure that the entire length of the line on your putter is exactly on the chalk line. Start making putts. This will train your eyes to "see square" precisely.
--Keep your the pressure in your hands soft and constant throughout the stroke. Sensitivity is obviously a huge part of putting. If your hands are tight on the grip you are diminishing your sensitivity - period. Also, if your grip pressure changes during the stroke, it's probably not "a stroke" but more likely a jab, flinch, spasm, push, hit ... well, you get the point -- good luck with that kind of technique.
--There is no independent action in the hands. Nothing could be more logical: If you do indeed have the putter face aligned precisely, as in the first point above, the last thing you'd want to do is to change the position of the face. Therefore, your hands should not be moving independently of your arms and shoulders. To see if your hands are moving, as a drill try watching your hands very carefully (instead of the ball) a few times. You'll see what your hands are doing quite easily.
There are many more (seemingly endless) details about putting, of course, but if you turn these fundamental concepts into habits it will take you a long way toward being a consistently good putter
...PGA professional golf

Headline News About Golf

Titleist Tour Report - Wachovia Championship

Fri, 05 May 2006 00:00:00 GMT
Take a look at this week's Titleist Tour Report from the Wachovia Championship with interviews from the Haas Family: Jay, Billy and Jay Jr.

New Episode of “Golf Fitness Academy Presented by Titleist” Focuses on Posture

Mon, 29 Aug 2005 00:00:00 GMT

Titleist Introduces 755 As New Flagship Iron Model

Fri, 11 Aug 2006 00:00:00 GMT

Cameron Rules at Q School

Tue, 13 Dec 2005 00:00:00 GMT
Scotty Cameron putters were the key to success at the 2005 PGA TOUR Qualifying Tournament

The Test Scores Are In: Titleist Is Once Again the #1 Ball at the Men's and Women's NCAA Championships.

Tue, 07 Jun 2005 00:00:00 GMT


golf drivers
golf gifts
golf swing